utilized rubber powEPTproduction line substantial output tyre shredEPTfor sale
The EPT tire recycling EPT will be controlled by the PLC, all the materials will be process inside of EPTs, there is Actual ZERO Pollution. 1 labor, 1 engineer can operate all the EPTs, no need to operate the EPTs, just management the PLC. the EPTs can shield the EPTs, operate the EPTs and hold the EPTs perform easily.
Specification
one.Tire shredEPTEPT
The Rubber ShredEPTEPT undertake PLC automatic management technique, with automated reversal control system in overload issue. Two-shaft tire crusher is EPTly developed for previous tires with minimal velocity and large torque to minimize sounds and EPT use.
The blade of the shredEPTis created of higher top quality steel and subjected to Bodycote warmth treatment method to accomplish the ideal crushing efficiency.The shredEPTis easy to disassemble and modify cutter blade and ideal for tearing big, additional thick and difficult components.The thickness assortment of the crushing blade is 25mm-152mm in accordance to the tire variety,output and closing item. The grinEPTcan procedure OTR tires,large truck tires,auto tires and so on at the pace of 1-30tons whithin one hour.
| Design | Enter dimension | Output dimension | Cappacity | Motor | Blades amount | Proportions | Fat |
| TS-800 | 800mm | fifty*50mm | one-2T/h | 2*22kw | 16pcs | 4*2.6*3.2m | 8T |
| TS-1200 | 1200mm | sixty*60mm | three-5T/h | 2*37kw | 20pcs | 4.eight*2.eight*three.5m | 14T |
| TS-1600 | 1600mm | fifty-150mm | 6-8T/h | 2*45kw | 16-30pcs | 5*2*3.4m | 18T |
| TS-1800 | 1800mm | fifty-150mm | seven-10T/h | 2*55kw | twenty-24pcs | five.six*2*3.4m | 23T |
| TS-2000 | 2000mm | 75-200mm | 10-15T/h | 2*75kw | 20-30pcs | six*two.four*4m | 36T |
| TS-2400 | 2400mm | a hundred-200mm | 20-30T/h | 2*110kw | 16-24pcs | 7.4*3.two*five.2m | 56T |
2.Rasper
EPT tire shredding program is designed to produce up to six tons for each hour of wire cost-free rubber mulch.This system generates up to a 99% wire cost-free chip ranging in dimensions among twelve-25mm depending on the wanted dimension.Right after processing,the metal is removed by our magnetic separation method.At this level,the wire totally free rubber chips are prepared to be colored and utilized for landscaping mulch and the steel is all set to be baled and sold to smelters.
| Rasper | Motor | EPT | Potential | Proportions | Weight | Slicing chamber | Closing solution |
| R45 | Siemens | 45KW | three hundred-500kg/H | 1.4*1.two*2.3m | 1700kg | 450*600mm | 10-30mm |
| R55 | Siemens | 55KW | five hundred-700kg/H | one.seven*one.7*2.3m | 1850kg | 450*800mm | 10-30mm |
| R75 | Siemens | 75KW | seven-hundred-1T/H | two*2*four.1m | 3500kg | 550*800mm | 10-30mm |
| R90 | Siemens | 90KW | 1-one.5T/H | two.one*two.one*4.1m | 4200kg | 550*1000mm | 10-30mm |
| R132 | Siemens | 132KW | one.5-3T/H | 2*two.5*4.1m | 6100kg | 742*1200mm | 10-30mm |
| R315 | Siemens | 315KW | 3-6T/H | six.two*two.one*3.6m | 12400kg | 697*1562mm | ten-30mm |
three.Granulator EPT
Squander Tire Recycling Rubber Granule Making EPT is adopting physical recycling strategy and is designed to grind the rubber mulch from the rasper into little granules as fantastic as one-6mm. The granules are screened and re-circulated until finally the wanted dimension is attained. This Entirely-Automated Tyre Recycling Line working in typical temperature, no need to add any other chemical compounds, no air pollution to the setting. This is the ideal way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Ability | 300-500kg/h | 500-800kg/h | 800-1500kg/h |
| Dimensions | one.8*one.6*two.4m | 1.8*1.9*two.4m | two.2*2.3*3m |
| Closing solution | one-6mm | 1-6mm | one-6mm |
4.Miller
Rubber powEPTis the final consequence of ambient tire recycling.At this phase,crumb rubber is ground down into a clear powEPTform with almost all steel and fiber removed.Rubber powEPThas quite a few secondary utilizes from injection molding items,coatings,roofing materials and numerous asphaltapplications.
Rubber powEPTis typically discovered in 40-74 microns(.forty-.74mm) in dimension.This micron size metarial has the benefit of getting integrated into new or eXiHu (West Lake) Dis.sting formulations for different polymers and finished merchandise.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Input merchandise | Hefty obligation truck tyres to bicycle tyres | |||
| Enter dimension | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output measurement | shred to thirty-a hundred and twenty mesh rubber powder | |||
| Potential | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Complete Kw | 680-760kw | 516-556kw | 347-372kw | one hundred seventy-190kw |
Mob 151366 0571 6
FAQ:
Q1,Are you a factory or a buying and selling firm?
A. We are a maker with thirty a long time production expertise in tire recycling EPT. We have export license, we can offer you you the manufacturing unit costs.
Q2. Can you ensure the capability as you pointed out ?
A. Absolutely of course,other than that,we also offer 3-5years warranty.
Q3, are you sure the closing rubber powEPTcan be completely thoroughly clean out of wire metal or nylon ?
A. The final powEPTpurity can reach 99.nine%. we have magnetic separator which can independent the wire steel from the rubber powder.
