squander tyre crushing EPT rubber shredding EPT
The EPT tire recycling EPT will be controlled by the PLC, all the materials will be procedure inside of of EPTs, there is True ZERO Pollution. 1 labor, 1 engineer can run all the EPTs, no require to work the EPTs, just control the PLC. the EPTs can defend the EPTs, work the EPTs and preserve the EPTs operate smoothly.
Specification
1.Tire shredEPTEPT
The Rubber ShredEPTEPT undertake PLC automatic handle system, with automated reversal management program in overload situation. Two-shaft tire crusher is EPTly made for aged tires with reduced velocity and substantial torque to minimize sound and EPT use.
The blade of the shredEPTis made of substantial quality steel and subjected to Bodycote warmth treatment to attain the best crushing performance.The shredEPTis effortless to disassemble and modify cutter blade and ideal for tearing large, additional thick and difficult supplies.The thickness variety of the crushing blade is 25mm-152mm in accordance to the tire kind,output and closing item. The grinEPTcan method OTR tires,massive truck tires,automobile tires and so on at the velocity of 1-30tons whithin one hour.
| Product | Enter size | Output size | Cappacity | Motor | Blades amount | Dimensions | Bodyweight |
| TS-800 | 800mm | fifty*50mm | 1-2T/h | two*22kw | 16pcs | four*two.six*three.2m | 8T |
| TS-1200 | 1200mm | sixty*60mm | three-5T/h | two*37kw | 20pcs | 4.eight*two.8*3.5m | 14T |
| TS-1600 | 1600mm | fifty-150mm | 6-8T/h | two*45kw | sixteen-30pcs | five*two*three.4m | 18T |
| TS-1800 | 1800mm | 50-150mm | 7-10T/h | 2*55kw | twenty-24pcs | 5.six*2*three.4m | 23T |
| TS-2000 | 2000mm | seventy five-200mm | 10-15T/h | two*75kw | 20-30pcs | 6*two.4*4m | 36T |
| TS-2400 | 2400mm | a hundred-200mm | twenty-30T/h | two*110kw | 16-24pcs | 7.four*three.2*5.2m | 56T |
2.Rasper
EPT tire shredding system is made to make up to six tons per hour of wire totally free rubber mulch.This method produces up to a ninety nine% wire cost-free chip ranging in dimensions among 12-25mm relying on the preferred size.Following processing,the steel is taken off by our magnetic separation system.At this position,the wire free of charge rubber chips are prepared to be coloured and used for landscaping mulch and the steel is ready to be baled and offered to smelters.
| Rasper | Motor | EPT | Potential | Dimensions | Bodyweight | Slicing chamber | Last product |
| R45 | Siemens | 45KW | three hundred-500kg/H | 1.4*1.2*2.3m | 1700kg | 450*600mm | ten-30mm |
| R55 | Siemens | 55KW | 500-700kg/H | 1.7*one.7*two.3m | 1850kg | 450*800mm | 10-30mm |
| R75 | Siemens | 75KW | 700-1T/H | two*two*4.1m | 3500kg | 550*800mm | 10-30mm |
| R90 | Siemens | 90KW | one-one.5T/H | 2.1*2.1*four.1m | 4200kg | 550*1000mm | ten-30mm |
| R132 | Siemens | 132KW | 1.five-3T/H | 2*2.five*four.1m | 6100kg | 742*1200mm | ten-30mm |
| R315 | Siemens | 315KW | 3-6T/H | 6.2*2.1*three.6m | 12400kg | 697*1562mm | 10-30mm |
three.Granulator EPT
Waste Tire Recycling Rubber Granule Creating EPT is adopting physical recycling method and is made to grind the rubber mulch from the rasper into tiny granules as fine as one-6mm. The granules are screened and re-circulated until the sought after dimension is reached. This Entirely-Automated Tyre Recycling Line operating in typical temperature, no need to include any other chemical substances, no pollution to the setting. This is the ideal way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Capability | 300-500kg/h | 500-800kg/h | 800-1500kg/h |
| Dimensions | one.eight*1.six*two.4m | one.eight*one.nine*2.4m | two.two*two.3*3m |
| Last merchandise | 1-6mm | one-6mm | 1-6mm |
4.Miller
Rubber powEPTis the last end result of ambient tire recycling.At this stage,crumb rubber is ground down into a clear powEPTform with practically all steel and fiber removed.Rubber powEPThas several secondary uses from injection molding goods,coatings,roofing components and different asphaltapplications.
Rubber powEPTis normally found in 40-74 microns(.forty-.74mm) in size.This micron measurement metarial has the advantage of being integrated into new or eXiHu (West Lake) Dis.sting formulations for various polymers and completed merchandise.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Input merchandise | Heavy duty truck tyres to bicycle tyres | |||
| Enter size | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output dimension | shred to 30-a hundred and twenty mesh rubber powder | |||
| Potential | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Total Kw | 680-760kw | 516-556kw | 347-372kw | one hundred seventy-190kw |
Mob 151366 0571 six
FAQ:
Q1,Are you a factory or a investing firm?
A. We are a manufacturer with 30 years manufacturing experience in tire recycling EPT. We have export license, we can offer you the factory rates.
Q2. Can you ensure the capacity as you talked about ?
A. Undoubtedly yes,other than that,we also give three-5years guarantee.
Q3, are you sure the final rubber powEPTcan be completely thoroughly clean out of wire metal or nylon ?
A. The last powEPTpurity can get to 99.9%. we have magnetic separator which can separate the wire steel from the rubber powder.
